Brand: scuvette. 10mm quartz large screw cap cuvette with seat five-way 3.5mL fully sealed with M12 PTFE thread cap, suitable for anaerobic, volatile-sample and fluorescence experiments. Japanese imported JGS1 fused silica, optical contact one-piece molding process (premium; comparable to German original imports), >83% transmittance, 200nm-2500nm wavelength, max operating temp ≤1200°C. Overall height with cap 56mm. Seat design for stable mounting in spectrophotometer. PTFE solid or injectable cap with PTFE or silicone septum sold separately.
01
CAS Certification
02
Optical Contact One-Piece Molding (German Tech)
03
Seat Design Dimensions — 12.5 × 12.5 × 56 mm with Cap
4.9
★★★★★
Based on 43 verified reviews
CD
Carlos D.
Spain · Verified Buyer
★★★★★
Excelente relacion calidad-precio. Las cubetas llegaron en perfecto estado y las medidas son precisas. Funcionan muy bien con nuestro espectrofotometro.
Reviewed on May 28, 2026
RP
Raj P.
India · Verified Buyer
★★★★☆
Good product, the finish is clean and the windows are clear. Shipping took a bit longer than expected but the cuvettes themselves are worth the wait.
Reviewed on May 30, 2026
CW
Chen W.
Singapore · Verified Buyer
★★★★★
Excellent product. The optical contact process ones are comparable to German brands at a fraction of the cost. Our UV-Vis results are clean and reproducible.
Reviewed on Aug 12, 2026
SJ
Sarah J.
United States · Verified Buyer
★★★★★
Perfect for our UV-Vis applications. The quartz is clear, no bubbles or inclusions visible. Paired testing transmittance was within spec. Very satisfied.
Reviewed on May 15, 2026
JH
James H.
United Kingdom · Verified Buyer
★★★★☆
Good value cuvettes for routine lab work. The finish on the windows is clean and the dimensional accuracy is within tolerance. Would recommend for budget-conscious labs.
Reviewed on Aug 1, 2026
10mm Quartz Screw Cap Cuvette - Frequently Asked Questions
Is this screw cap cuvette airtight and leak-proof?
Yes. The threaded PTFE solid cap seals against the quartz body with a precision thread, keeping the 3.5 mL sample airtight for volatile solvents and oxygen- or moisture-sensitive assays. The M10 (or M12 on the EU version) thread is fully reusable - tighten hand-tight only to protect the thread.
Two-way, four-way or five-way windows - which do I need?
Two-way cells suit standard UV-Vis absorbance measurements. Four-way and five-way cells are for fluorescence, multi-angle readings or reference-channel setups where light must enter from several sides without rotating the cell. All variants share the same 10 mm path length and 3.5 mL chamber - compare the full screw cap cuvette range.
How do I clean a quartz screw cap cuvette without scratching it?
Rinse immediately after use, flush with deionized water and a mild detergent (or 1:1 HCl for organic residues), then rinse with isopropanol and air-dry. Never use abrasive wipes, brushes or metal tools inside the optical chamber. See the cuvette care guide for the full protocol.
