Brand: scuvette. 10 mm black wall (light-blocking) quartz micro cuvette, two-way clear windows, 350–1750 μL volume. Japanese imported JGS1 fused silica, glue bonding process. Black wall design blocks stray light for low-volume and fluorescence work; two opposite sides clear for UV-Vis spectrophotometer. Max operating temp <100°C, transmittance >80%, 200nm-2500nm wavelength. Neutral samples only. Outline dimension 12.5 × 45 mm (standard 10 mm format). Supplied with PTFE lid; packed 2 pcs per plastic box.
01
Black Wall Light-Blocking Design
02
Micro-Volume Sample Chamber
03
Clear Optical Windows (Two-Way / 4-Port)
04
JGS1 Fused Silica — Full UV-Vis Transmission
05
Glue Bonding Process, Clean Seams
4.9
★★★★★
Based on 38 verified reviews
TK
Tobias K.
Germany · Verified Buyer
★★★★★
The black wall really cuts stray light for our low-volume fluorescence reads. Pairing is consistent and the PTFE lid seals well. Exactly as described.
Reviewed on Jul 3, 2026
AM
Amara M.
Australia · Verified Buyer
★★★★★
Perfect for tiny sample volumes — the 350 μL version saves a lot of reagent. Windows are clean and plano-parallel. Will reorder.
Reviewed on Jul 6, 2026
RS
Ravi S.
United Kingdom · Verified Buyer
★★★★★
Good value micro cuvettes. We use the 1750 μL ones for routine UV and they perform exactly as expected. Arrived well packed.
Reviewed on Jul 9, 2026
CL
Camille L.
France · Verified Buyer
★★★★★
Transmittance is solid for the price and the glue joints look clean. The black wall makes a visible difference versus clear micro cells.
Reviewed on Jun 21, 2026
JW
Ji-Woo W.
South Korea · Verified Buyer
★★★★★
The black wall cells cut stray light noticeably in our fluorescence measurements. Optical finish is clean and shipping was fast.
Reviewed on Jun 25, 2026
Black Wall Quartz Micro Cuvette (Two-Way 100µL, Center Height 15mm) - Frequently Asked Questions
What does the black wall on this cuvette do?
The blackened side walls absorb stray light instead of letting it pass through the cell body, which suppresses light piping and scattered-light interference. This makes the 100µL cuvette well suited to low-volume fluorescence measurements where a clean signal-to-noise ratio matters. Only neutral (non-fluorescent) samples should be used.
What is the minimum sample volume for the 100µL cuvette?
This cuvette is rated for a sample volume of 100µL at 15mm center height. At the rated volume the light path is fully covered, giving reproducible readings run after run. If you need a different sample volume, pick the matching variant from the related products below.
Can I use a black wall cuvette for UV absorbance measurements?
Yes. The two clear windows are JGS1 fused silica with transmittance above 80% from 200 nm to 2500 nm, so the cell can be used for UV-Vis absorbance as well as fluorescence. Keep in mind the black walls only control stray light – use neutral samples and stay below the maximum operating temperature of 100°C.
How do I clean a black wall micro cuvette without scratching?
Rinse immediately with deionized water, flush with 1% laboratory detergent solution, then rinse with isopropanol. Use only soft-tipped pipettes or gel-loading tips to fill – never insert forceps or hard objects. Air-dry inverted or blot with lint-free wipes. For the full protocol see our cuvette cleaning guide.
